Fluorescent LED tubes have dominated commercial illumination in ceilings for more than 50 years. With the introduction of the LED to the market, the T8 LED tubes have become the perfect solution to replace the existing fluorescent T8 providing many benefits such as energy efficiency, while manufactured with non-toxic and long lasting materials, easy installation, and low maintenance cost. These tubes have passed the UL, and DLC standards which are certified to guarantee satisfaction required for fixtures that use T8 tubes. When replacing existing fluorescent lighting, remember to remove (bypass) the existing ballast and to plug the LED T8 tube directly to the line voltage. For new installation, connect the tube directly to line voltage. Always check that your line voltage is between the ranges of our LED T8 tube’s input voltage shown in the description. The installation of the product becomes simple because it can be connected in two ways; either both the neutral, and the phase by the same G13 base in each pin independently, or the neutral to one G13 base and the phase to the other G13 base. Always consult with a professional before installing the product.
4 ft Hybrid LED Tube, 18W
$8.75
- 4′ Fluorescent tube replacement.
- Hybrid Tube.
- One side, two side connection.
- Ballast compatible.
- *To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 10 units.
SKU: ETB-AHB4
Categories: COMMERCIAL AREAS, T8 TUBES
Specifications
Electrical Information
Power Consumption
18W
Dimmable
No
Driver Type
Integrated & Isolated
Input Voltage
100-277VAC
Lighting Characteristics
Color Options
5000K
Luminous Flux
1,800-2,250Lm
Beam Angle
300°
Chip Type
SMD2835
CRI
>80
Life Span
50,000 Hrs
Equivalent
40W Fluorescent Bulb
Lighting Cover
Clear, Frosted
General Characteristics
Length
2
Width
2"
Height
50"
Finish
White/Silver
IP Rating
IP20
Suitable For Damp Location
Yes
Suitable For Wet Location
No
Warranty
5 Years
Socket Type
G13
Installation Related Information
Connection
Oposite Sides, Single Side
Mounting Type
G13 Base
Certifications
DLC Compliance
Yes
FREQUENTLY BOUGHT TOGETHER
4ft LED Strip Light Fixture, 40W, 3CCT
$52.50
- Best Replacement for fluorescent 2-light strip fixtures
- It operates on 100-277VAC.
- UL approved.
- Color Switchable between 3000K, 4000K, 5000K.
- Included hardware for surface mounting.
4ft LED Tri-proof Fixture, 40W
$53.99
- Best Replacement for fluorescent Tri-proof fixtures
- It operates on 100-277VAC.
- UL approved.
- Cool White.
- Included hardware for surface mounting.
8 ft LED Tube FA8 Base, 36W
$26.25
- 8' Fluorescent tube replacement.
- Hybrid Tube.
- One side, two side connection.
- To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 10 units.
Related products
UL SMD5050 LED Strips 300 RGB Chips, RGB High Output Unit
$38.25
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- LED flexible strip for interior use.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply and RGB controller are not included.
60W Waterproof Meanwell Power Supply, 24VDC
$35.50
- It operates on 90-264VAC.
- 24VDC Output Voltage.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
UL SMD2835 LED Strip 300 Side Bendable Single Color Chips, Bright Output
$40.50
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- For interior use only.
- Works with 12VDC power units.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply is not included.
UL SMD5050 LED Strips 150 RGB Chips, Wet Rated
$35.99
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC power units.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED on the cuttable mark.
- Power supply and RGB controller are not included.
150W Enclosed Power Supply, 12VDC
$43.75
- It operates on 115VAC or 230VAC.
- 12VDC Output Voltage.
- Maximum power rated at 150W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
UL SMD2216 LED Strip 1500 Single Color Chips, Super Bright Output
$68.50
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 1500 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 24VDC power units.
- LED flexible strip for interior use.
- Cut at every 6th LED / 1" on the cuttable mark.
- Power supply is not included.
150W Waterproof Meanwell Power Supply, 12VDC
$104.99
- It operates on 90-305VAC.
- 12VDC Output Voltage.
- Maximum power rated at 150W.
- Suitable for Damp and Wet locations.
- Metal housing with class I design.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 300 RGBW Chips, RGBW High Output Unit
$55.50
- Multicolor LED Strip, RGBW Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC.
- LED flexible strip for interior use.
- Cut at every 3rd LED on the cuttable mark.
- Power supply and RGBW controller are not included.