Ecopowertech’s LED Shoebox luminaire has a beautiful low profile design intended for outdoor applications, and it combines the latest in LED technology including weathertight IP65 LED driver and thermal management. High-Performance illumination that last 50,000 hrs. It’s ideal for replacing conventional parking lot and area lights that uses metal halide from 150-1000W, and it immediately generates energy saving up to 80%.
LED Shoebox, 150W, Slit Fitter Mount
$183.50
Color Options
- 400W Metal Halide or HPS Replacement.
- Designed for parking lots, and open areas.
- It operates on 100-277VAC.
- Slit Fitter Mount included.
- Straight Arm, and Trunnion Base are also available.
Out of stock
SKU: ESB-C150WSF50K
Categories: COMMERCIAL AREAS, SHOEBOX LIGHTS
Specifications
Electrical Information
Power Consumption
150W
Dimmable
Yes
Driver Type
Integrated
Input Voltage
100-277VAC
Lighting Characteristics
Color Options
5000K
Luminous Flux
19,500Lm
Beam Angle
150°X85°
Chip Type
SMD3030
Lighting Cover
Clear
CRI
>75
Life Span
50,000 Hrs
Equivalent
250-400W Metal Halide
General Characteristics
Base
Slit Fitter
Length
17
Width
12"
Height
16"
Finish
Dark Bronze
IP Rating
IP65
Suitable For Damp Location
Yes
Suitable For Wet Location
Yes
Warranty
5 Years
Installation Related Information
Mounting Type
2" Round/Square Pole
Certifications
DLC Compliance
No
UL Listed
Yes
FREQUENTLY BOUGHT TOGETHER
LED Shoebox, 300W, Slit Fitter Mount
$282.50
- 800-1,000W Metal Halide or HPS Replacement.
- Designed for parking lots, and open areas.
- It operates on 100-277VAC.
- Slit Fitter Mount included.
- Straight Arm, and Trunnion Base are also available.
LED Shoebox, 450W, Slit Fitter Mount
$548.99
- 1000W-1500W Metal Halide or HPS Replacement.
- Designed for parking lots, and open areas.
- It operates on 100-277VAC.
- Input Voltage of 347-480VAC is available as special order.
- Slit Fitter Mount included.
- Straight Arm, and Trunnion Base are also available.
Related products
UL SMD5050 LED Strips 300 RGBW Chips, Wet Rated
$49.50
- Multicolor LED Strip, RGBW Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply and RGBW controller are not included.
UL SMD2835 LED Strip 300 Side Bendable Single Color Chips, Bright Output
$40.50
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- For interior use only.
- Works with 12VDC power units.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply is not included.
100W Waterproof Meanwell Power Supply, 24VDC
$50.99
- It operates on 90-264VAC.
- 24VDC Output Voltage.
- Maximum power rated at 100W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
150W Waterproof Meanwell Power Supply, 12VDC
$104.99
- It operates on 90-305VAC.
- 12VDC Output Voltage.
- Maximum power rated at 150W.
- Suitable for Damp and Wet locations.
- Metal housing with class I design.
- Manufactured by Meanwell.
150W Waterproof Meanwell Power Supply, 24VDC
$104.99
- It operates on 90-305VAC.
- 24VDC Output Voltage.
- Maximum power rated at 150W.
- Suitable for Damp and Wet locations.
- Metal housing with class I design.
- Manufactured by Meanwell.
200W Enclosed Power Supply, 12VDC
$55.99
- It operates on 115VAC or 230VAC.
- Single output switching power supply.
- 12VDC Output Voltage.
- Maximum power rated at 200W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 600 RGB Chips, RGB Super Bright Output Unit
$73.25
- Multicolor LED Strip, RGB Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 600 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 24VDC power units.
- LED flexible strip for interior use.
- Cut at every 6th LED / 2" on the cuttable mark.
- Power supply and RGB controller are not included.
60W Dimmable Power Supply for 12VDC LED Units, Thin Design
$95.25
- It operates on 120VAC.
- Dimmable Unit. 12VDC Output Voltage.
- UL Recognized, Class 2.
- Maximum power rated at 60W.
- Suitable for Damp and Wet locations.
- Compatible with most known brand including Lutron, Leviton and Legrand.
- Pair it with Magnetic Low Voltage (MLV) dimmers.
- Manufactured by Magnitude Lighting.