RGB DMX Decoder, 6A per Channel, RJ45
$49.50
- DMX512 Communication System.
- Pair it up with any LED RGB strips, or RGB Low Voltage LED wall washers.
- It needs a 12/24VDC power supply to operate.
- 3 Channels (RED, GREEN & BLUE)
- Maximum current: 18A (6A per Channel)
- Rated Power: 216W/12V, 432W/24V.
- RJ45.
In stock
Description
Each DMX common controller occupied 3 DMX address, adopt coding switch is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest , 512 address code could be settled in all. This DMX common controller adopts the advanced micro control unit, receives standard DMX-512 digital control signal and transformed it into PWM signal to driving LED.
Specifications
Electrical Information
Dimmable
By DMX Control
Input Voltage
12/24VDC
Recommended Power Limit
216W/12VDC, 432W/24VDC
Output Voltage
12/24VDC, Same as Input voltage
Current Per Channel
6A
General Characteristics
IP Rating
IP20
Warranty
2 Years
Finish
Black
Installation Related Information
Connection
RJ45, Screw Terminal Block
Mounting Type
Screw-Ready Brackets on Edges
Control Unit Information
Channels
3 Channels (RGB)
Controllable By
DMX512 Controller
Certifications
CE Compliance
Yes
Rohs Compliance
Yes
Related products
Color Temperature Adjustable LED Strips 300 chips, High Output
- Color Temperature Adjustable. Ranges from 2700 to 6000K.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 24VDC power units.
- LED flexible strip for interior use.
- Cut at every 6th LED on the cuttable mark.
- Power supply and CCT controller are not included.
150W Enclosed Power Supply, 12VDC
- It operates on 115VAC or 230VAC.
- 12VDC Output Voltage.
- Maximum power rated at 150W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
8-feet Deep Flanged Aluminum Channel
- Interior use.
- For Recessed mounted applications.
- It can fit any LED strips lights with a width of 8mm, 10mm and 12 mm.
- Easy installation.
- It can be resized / cut to adapt to any length requirements.
- It comes with 2 pair of endcaps (1 blank and 1 with cable input), and 4 mounting brackets.
- *To ensure that our products arrive at your doorstep in the best possible condition, we have implemented a minimum order quantity of 4 units.
UL SMD2835 LED Strip 300 Side Bendable Single Color Chips, Bright Output
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- For interior use only.
- Works with 12VDC power units.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply is not included.
UL SMD2216 LED Strip 1500 Single Color Chips, Super Bright Output
- Single Color LED Strip.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 1500 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 24VDC power units.
- LED flexible strip for interior use.
- Cut at every 6th LED / 1" on the cuttable mark.
- Power supply is not included.
200W Enclosed Power Supply, 24VDC
- It operates on 115VAC or 230VAC.
- Single output switching power supply.
- 24VDC Output Voltage.
- Maximum power rated at 200W.
- Recommended to be installed inside a j-box.
- Output voltage can be adjusted through potentiometer.
- Manufactured by Meanwell.
100W Waterproof Meanwell Power Supply, 12VDC
- It operates on 90-264VAC.
- 12VDC Output Voltage.
- Maximum power rated at 100W.
- Suitable for Damp and Wet locations.
- Fully Isolated Plastic Case.
- Manufactured by Meanwell.
UL SMD5050 LED Strips 300 RGBW Chips, Wet Rated
- Multicolor LED Strip, RGBW Type.
- Every unit comes in a roll of 16.4 feet / 5 meters.
- 300 LED Chips equidistantly located in the complete roll. UL listed.
- Comes with 3m adhesive tape on the back of the strip.
- Works with 12VDC.
- Damp/Wet Rated. Non submersible.
- Cut at every 3rd LED / 2" on the cuttable mark.
- Power supply and RGBW controller are not included.
